Engineers

Non-fashion, non-skirt, non-gender discussions. If your post is related to fashion, skirts or gender, please choose one of the forums above for it.
User avatar
Milfmog
Moderator
Posts: 2233
Joined: Tue Jul 18, 2006 7:30 pm
Location: Buckinghamshire, UK

Engineers

Post by Milfmog »

Given the number of people here with an engineering or technical background, I thought the following might amuse folks. Feel free to add to the list...

Have fun,


Ian.

ENGINEER CLASSIFICATION TEST.

With the number of specialist fields growing daily, it becomes increasingly difficult to distinguish between the many different types of engineers. A simple way of telling them apart is to study the approach of the engineer to the problem of tightening a nut.

Apprentice Mechanical Engineer: Will tighten the nut to finger tight and then use a torque wrench to shear the bolt.

Mechanical Engineer: Will use the correct method, a hammer and cold chisel.

Structural Engineer: Similar to the mechanical engineer but he uses a 10lb sledgehammer.

Electrical Engineer: Will use a pair of pliers.

Electronic Engineer: Will use fine nosed pliers and ensure all the corners of the nut have been removed to prevent a mechanical engineer removing the item.

Production Engineer: Will make all this work unnecessary by forgetting to mill the flats in the first place.

Nuclear Engineer: Pops the whole assembly in a reactor and leaves it until it becomes so hot that no one dare approach it for a couple of millennia to see if the nut was tightened or not.

Plastics Engineer: Will mould the nut and bolt into one piece, producing thousands of very pretty but useless dumbbell shaped mouldings.

Industrial Design Engineer: Would never consider using such an un-aesthetic object.

Automobile Engineer: Will use a self-tapping screw, thus, dispensing with the nut altogether.

Instrument Engineer: Will just stand and gape at anything bigger than 12 B.A.

Chemical Engineer: Will throw the nut and bolt away and use glue instead.

Aeronautical Engineer: Uses a similar approach to the chemical engineer but would refer to the result as a bonded structure.

Avionics Engineer: Will run the nut up finger tight, but add some screw lock to stop it vibrating loose (or nail varnish if he’s run out of screw lock).

Civil Engineer: Will tighten the nut finger tight and then leave it to rust solid.

Software Engineer: Will stare blankly at it for several hours before deciding that he must have the wrong drivers.

Computer Engineer: Will wonder why there is a nut and bolt in the first place as the board connectors should hold everything in place, shouldn’t they?

Marine Engineer: Will register the vessel in Liberia to avoid anyone inspecting to see if the bolt was fitted.

Consultant Engineer: Will ask for £500 a day for two weeks to perform a feasibility study which will conclude that the nut is not required, thus saving himself from the ignominious fate of getting his hands dirty.

Chartered Engineer, (all disciplines): Will have forgotten what a nut and bolt is.
Do not argue with idiots; they will drag you down to their level and beat you with experience.
Cogito ergo sum - Descartes
Cogito cogito ergo cogito sum - Ambrose Bierce
STEVIE
Member Extraordinaire
Posts: 4883
Joined: Fri Sep 17, 2010 11:01 pm
Location: North East Scotland.

Re: Engineers

Post by STEVIE »

Fred Dibnah wiill come and haunt you for that.
User avatar
Milfmog
Moderator
Posts: 2233
Joined: Tue Jul 18, 2006 7:30 pm
Location: Buckinghamshire, UK

Re: Engineers

Post by Milfmog »

STEVIE wrote:Fred Dibnah wiill come and haunt you for that.
I can live with that - I reckon he'd be a fascinating guy to share a few beers with. Image

Have fun,


Ian.
Do not argue with idiots; they will drag you down to their level and beat you with experience.
Cogito ergo sum - Descartes
Cogito cogito ergo cogito sum - Ambrose Bierce
Big and Bashful
Member Extraordinaire
Posts: 2921
Joined: Sat Jan 14, 2006 3:51 pm
Location: Scottish West Coast

Re: Engineers

Post by Big and Bashful »

Excellent! I think you have all the angles covered there. Can't think of anymore.
I am the God of Hellfire! and I bring you truffles!
User avatar
Kirbstone
Member Extraordinaire
Posts: 5801
Joined: Sun Jun 06, 2010 7:55 pm
Location: Ireland

Re: Engineers

Post by Kirbstone »

...and Jodie Gilhooley (Engineer) will tell you that ALL engineers of whatever persuasion go to Heaven.

Tom K.
Carpe Diem......Seize the Day !
User avatar
crfriend
Master Barista
Posts: 15311
Joined: Fri Nov 19, 2004 9:52 pm
Location: New England (U.S.)
Contact:

Re: Engineers

Post by crfriend »

Colin Glencannon, where are ye when we need ya?
Retrocomputing -- It's not just a job, it's an adventure!
kingfish
Member Extraordinaire
Posts: 325
Joined: Wed Oct 22, 2003 1:49 pm
Location: Metrowest Suburbs of Boston

Re: Engineers

Post by kingfish »

The Art of Engineering:
Finding the right wrench to pound home the correct screw.
And I really need to finish the changes to this printed circuit board before the customer comes up with something else to tweak.
User avatar
r.m.anderson
Member Extraordinaire
Posts: 2613
Joined: Sun Nov 07, 2004 6:25 pm
Location: Burnsville MN USA

Re: Engineers

Post by r.m.anderson »

Well you can send in the clowns and make matters worse - - -
OR worse than that send in the "Lawyers (Solictors UK)" !
Guaranteed the end will never be seen and any budget shot to hell
and the argument about who was supposed to tighten the nut in the first place !

"A-Kilted-Nut"
rma
"YES SKIRTING MATTERS"!
"Kilt-On" -or- as the case may be "Skirt-On" !
WHY ?
Isn't wearing a kilt enough?
Well a skirt will do in a pinch!
Make mine short and don't you dare think of pinching there !
User avatar
skirtingtoday
Member Extraordinaire
Posts: 1520
Joined: Wed Nov 30, 2011 1:28 pm
Location: Edinburgh, Scotland

Re: Engineers

Post by skirtingtoday »

Talking on Engineers (of which I am one - Civil Engineer)...

Two engineering students were walking across a university campus when one said, where did you get such a great bike?"

The second engineer replied,"Well, I was walking along yesterday, minding my own business, when a beautiful woman rode up on this bike, threw it to the ground, took off all her clothes and said, "Take what you want."

The first engineer nodded approvingly and said, "Good choice; the clothes probably wouldn't have fited you anyway."

Boom! Boom!
"A lie gets halfway around the world before the truth has a chance to get its pants on" - Winston Churchill.
"If you tell a lie big enough and keep repeating it, people will eventually come to believe it" - Joseph Goebbels
User avatar
sapphire
Member Extraordinaire
Posts: 1308
Joined: Thu Aug 16, 2007 5:42 pm
Location: New England

Re: Engineers

Post by sapphire »

I have abandoned my search for truth and am now looking for a good fantasy.
----- Ashleighly Brilliant

Computing is no longer fun. Chip design looked interesting, kinda like a giant game of tetris, but that, alas is gone from this area.

So, raising chickens and planning for next year's garden....
Moderation is for monks. To enjoy life, take big bites.
-------Lazarus Long
User avatar
Since1982
Member Extraordinaire
Posts: 3449
Joined: Mon Oct 18, 2004 2:13 pm
Location: My BUTT is Living in the USA, and sitting on the tip of the Sky Needle, Ow Ow Ow!!. Get the POINT?

Re: Engineers

Post by Since1982 »

I'm trying to learn to write code, so I can become the worlds oldest billionaire like the Face Book's originator did. :D :D :D :D :faint:
I had to remove this signature as it was being used on Twitter. This is my OPINION, you NEEDN'T AGREE.

Story of Life, Perspire, Expire, Funeral Pyre!
I've been skirted part time since 1972 and full time since 2005. http://skirts4men.myfreeforum.org/
Taj
Member Extraordinaire
Posts: 279
Joined: Sat Feb 13, 2010 5:10 pm
Location: Denver, CO

Re: Engineers

Post by Taj »

The building engineer (maintenance guy) will tighten the nut with which ever wrench is handy all the while cursing the sheepskinned engineers for putting the damn thing in an impossibly inaccessible place to begin with.

The locomotive engineer will put the nut in his lunchbox because he needs one that size at home.
You don't get to judge me by your standards. I have to judge me by mine.
User avatar
crfriend
Master Barista
Posts: 15311
Joined: Fri Nov 19, 2004 9:52 pm
Location: New England (U.S.)
Contact:

Re: Engineers

Post by crfriend »

I was going to recommend a short hilarious bit on YouTube featuring a young Dilbert and his mom, but it seems that Google/YouTube have gone rogue and are demanding a version of Adobe Flash that does not exist, or may be virus-infested. The clip is known as "The Knack", but search for it at our own peril.

For the impatient, or the security minded, the punch line is the young Dilbert's mother sobbing, "Can he lead a normal life?" and the doctor proclaiming, "No, he'll be an engineer."

Sometimes I really -- really -- hate technology, and especially the inane toddler-like pursuit of "new! shiny!". Idiots. What ever happened to your mantra of "Don't do evil?" Well, Google? What of it!
Retrocomputing -- It's not just a job, it's an adventure!
User avatar
sapphire
Member Extraordinaire
Posts: 1308
Joined: Thu Aug 16, 2007 5:42 pm
Location: New England

Re: Engineers

Post by sapphire »

I liked new shiny when it made sense. Hasn't made sense in decades.
Moderation is for monks. To enjoy life, take big bites.
-------Lazarus Long
User avatar
Milfmog
Moderator
Posts: 2233
Joined: Tue Jul 18, 2006 7:30 pm
Location: Buckinghamshire, UK

Re: Engineers

Post by Milfmog »

Taj wrote:The building engineer (maintenance guy) will tighten the nut with which ever wrench is handy all the while cursing the sheepskinned engineers for putting the damn thing in an impossibly inaccessible place to begin with.

The locomotive engineer will put the nut in his lunchbox because he needs one that size at home.
I like those and will add them to my list.

Thanks.

Have fun,


Ian.
Do not argue with idiots; they will drag you down to their level and beat you with experience.
Cogito ergo sum - Descartes
Cogito cogito ergo cogito sum - Ambrose Bierce
Post Reply