# Often asked: What Is A Good Coefficient Of Drag For A Road Car?

Contents

- 1 Is a low coefficient of drag good?
- 2 What car has the lowest coefficient of drag?
- 3 What is a high drag coefficient?
- 4 What is the least aerodynamic shape?
- 5 Is 0.3 A good drag coefficient?
- 6 Does size affect drag coefficient?
- 7 Does drag coefficient change with size?
- 8 How do you force drag?
- 9 What is the most aerodynamic car?
- 10 What is the most aerodynamic shape?
- 11 What is the drag coefficient of a f1 car?
- 12 How do you reduce drag coefficient?
- 13 What shape has the highest drag coefficient?
- 14 Can coefficient of drag be greater than 1?

## Is a low coefficient of drag good?

A low coefficient is conducive to high top speed and low fuel consumption, while a higher drag coefficient is generally found in cars searching for high cornering speeds influenced by downforce. It shows that a car’s coefficient of drag can be found by analysing the drag force acting on the car at a given speed.

## What car has the lowest coefficient of drag?

But according to Mercedes, the new A-Class sedan features the lowest drag of any production vehicle in the world, with a coefficient of 0.22. At this level, it defends the world record held by the Mercedes-Benz CLA. Meanwhile, the A-Class hatch is just slightly less impressive at 0.25.

## What is a high drag coefficient?

A low drag coefficient implies that the streamline shape of the vehicle’s body is such as to enable it to move easily through the surrounding viscous air with the minimum of resistance; conversely a high drag coefficient is caused by poor streamlining of the body profile so that there is a high air resistance when the

## What is the least aerodynamic shape?

It is generally accepted that some variation of the teardrop/airfoil shape has the lowest drag coefficient.

## Is 0.3 A good drag coefficient?

Typical drag coefficients The average modern automobile achieves a drag coefficient of between 0.25 and 0.3. Sport utility vehicles (SUVs), with their typically boxy shapes, typically achieve a Cd=0.35–0.45. The drag coefficient of a vehicle is affected by the shape of body of the vehicle.

## Does size affect drag coefficient?

Effect of Size on Drag. The amount of drag generated by an object depends on the size of the object. Like the other aerodynamic force, lift, the drag is directly proportional to the area of the object. Doubling the area doubles the drag.

## Does drag coefficient change with size?

Drag coefficients, as shown in the sketch above, change depending on the Reynolds number of the flow experienced. The drag of some simple objects, like spheres and cylinders, can be scaled up from model size to full size without too much hassle.

## How do you force drag?

For larger objects (such as a baseball) moving at a velocity v in air, the drag force is given by FD=12CρAv2 F D = 1 2 C ρ A v 2, where C is the drag coefficient (typical values are given in Table 1), A is the area of the object facing the fluid, and ρ is the fluid density.

## What is the most aerodynamic car?

The electric Mercedes EQS is the world’s most aerodynamic production car. Its 0.20 drag coefficient beats the Tesla Model S and Lucid Air. The cab-forward design isn’t just for good looks.

## What is the most aerodynamic shape?

The most aerodynamically-efficient shape for a vehicle is, in theory, a teardrop. A smooth shape minimises drag and the profile, if correctly configured, keeps airflow attached to the surface rather than breaking free and causing turbulence.

## What is the drag coefficient of a f1 car?

Typical Formula 1 car drag coefficients are between 0.7 and 1.1, depending on the circuit the car is set up for.! A lot of this drag is due to the wings but a lot of it is due to the uncovered wheels.

## How do you reduce drag coefficient?

Methods of decreasing the drag coefficient of a vehicle include re-shaping the rear end, covering the underside of the vehicles, and reducing the amount of protrusions on the surface of the car.

## What shape has the highest drag coefficient?

A quick comparison shows that a flat plate gives the highest drag, and a streamlined symmetric airfoil gives the lowest drag–by a factor of almost 30!

## Can coefficient of drag be greater than 1?

Two objects having the same reference area moving at the same speed through a fluid will experience a drag force proportional to their respective drag coefficients. Coefficients for unstreamlined objects can be 1 or more, for streamlined objects much less.