First production from sewing table

For those do-it-yourselfers...
Post Reply
User avatar
beachlion
Member Extraordinaire
Posts: 1627
Joined: Wed Aug 14, 2013 3:15 am
Location: 65 year The Hague, The Netherlands, then Allentown, PA, USA

First production from sewing table

Post by beachlion »

As a first from the new sewing table, I wanted to make a denim skirt that would fall about 4" (10 cm) over the knee. I used my regular circle skirt approach. The waist would sit a little higher than usual to obtain a slimmer effect. In the end, it was too slim. Bummer.

The skirt has a cone-like shape and it was too tight around the hips.
P1010012qq.jpg
A modification is planned. I take the top part apart, shorten the skirt and put the waist a little lower.

I have already a new pattern for the same type of skirt but with a longer hem. And it will be in a black fabric. I'm used to have a denim skirt just above the knee and socks just below the knee. With a skirt below the knee, nobody will see the difference between socks and tights. I know, it is all in the head. ;) But it is my head afterall.
You do not have the required permissions to view the files attached to this post.
All progress takes place outside the comfort zone - M J Bobak
Freedomforall
Member Extraordinaire
Posts: 1168
Joined: Mon Jan 23, 2017 3:00 pm

Re: First production from sewing table

Post by Freedomforall »

Sir you are quite the seamtress. You created a most excellent garment and wear it well.
weeladdie18
Member Extraordinaire
Posts: 1474
Joined: Thu Apr 05, 2018 3:17 pm

Re: First production from sewing table

Post by weeladdie18 »

I like the style of your denim skirt.....
I prefer to wear my skirts at my true waist......... This is the indentation above the hips and below the rib cage.
At present I am wearing my hem below my kneecap to keep my knees warm.

I prefer an elasticated waist band or a waistband elasticated at both hips....I usually wear a belt with my skirts.
One of the problems with female size skirts is that some are too baggy on the male hips with my size 12 male waist..weeladdie
User avatar
voodoomagic
Member Extraordinaire
Posts: 159
Joined: Mon Sep 24, 2018 2:50 am

Re: First production from sewing table

Post by voodoomagic »

beachlion wrote:A modification is planned. I take the top part apart, shorten the skirt and put the waist a little lower
I agree with you in the modifications, that is where I always wear my skirts at and the length just below the knee would be great for winter. And it looks great, are you following a pattern or free hand?
User avatar
beachlion
Member Extraordinaire
Posts: 1627
Joined: Wed Aug 14, 2013 3:15 am
Location: 65 year The Hague, The Netherlands, then Allentown, PA, USA

Re: First production from sewing table

Post by beachlion »

voodoomagic wrote:........ And it looks great, are you following a pattern or free hand?
I design everything from scratch. I follow two lines, circle skirts and skirts with darts.

For the circle skirts, I follow this program. It is easy to make and in general it fits just right. Because of the loose material, it conceals most of the unwanted bulges and give you unlimited stride.
http://www.poppyrecords.co.uk/dressmaki ... tCalcs.php

For skirts with darts I use a standard pattern for the top part of the skirt, more or less from the hip up. With that as a base, I design the flare of the fabric and the length of the skirt. Putting in a zipper and making the waist band right are the most challenging parts of the process.
This YouTube gives you an idea of making a standard pattern.
https://www.youtube.com/watch?v=_cz7Fx-RHXM

I started with almost zero experience at skirt making. My first projects were kilts and only later skirts. With every skirt I made, I gained some experience in sewing and handling the machine. I'm still far from good but it is a slow learning process.
All progress takes place outside the comfort zone - M J Bobak
Grok
Member Extraordinaire
Posts: 2804
Joined: Fri Aug 29, 2008 2:21 am

Re: First production from sewing table

Post by Grok »

Well done, Beachlion. :D
User avatar
voodoomagic
Member Extraordinaire
Posts: 159
Joined: Mon Sep 24, 2018 2:50 am

Re: First production from sewing table

Post by voodoomagic »

Thanks beachlion, going to go check that out and thanks for the info.
User avatar
beachlion
Member Extraordinaire
Posts: 1627
Joined: Wed Aug 14, 2013 3:15 am
Location: 65 year The Hague, The Netherlands, then Allentown, PA, USA

Re: First production from sewing table

Post by beachlion »

I made a follow up after the failure of the denim skirt. This time I used the last of my heavy black twill and used the pattern block from Diane Deziel from YouTube, and some modifications to make the hem wider. I'm still not satisfied because the skirt is a little too long. I have to see what a 2 or 4 cm reduction will bring.
P1010004aq.jpg
Back to the drawing board, ehh to the sewing table.
You do not have the required permissions to view the files attached to this post.
All progress takes place outside the comfort zone - M J Bobak
User avatar
Sinned
Member Extraordinaire
Posts: 5804
Joined: Sun Aug 19, 2012 5:28 pm
Location: York, England

Re: First production from sewing table

Post by Sinned »

bl, a long skirt can always be made shorter but not the other way around ( easily ). Even I have shortened long skirts and I'm a novice at sewing.
I believe in offering every assistance short of actual help but then mainly just want to be left to be myself in all my difference and uniqueness.
User avatar
Fred in Skirts
Member Extraordinaire
Posts: 3988
Joined: Mon Mar 14, 2016 6:48 pm
Location: Southeast Corner of Aiken County, SC USA

Re: First production from sewing table

Post by Fred in Skirts »

I think the skirt looks fine the way it is. I like long skirts for winter as they keep me warm when out.
"It is better to be hated for what you are than be loved for what you are not" Andre Gide: 1869 - 1951
Always be yourself because the people that matter don’t mind and the ones that mind don’t matter.
User avatar
crfriend
Master Barista
Posts: 14431
Joined: Fri Nov 19, 2004 9:52 pm
Location: New England (U.S.)
Contact:

Re: First production from sewing table

Post by crfriend »

beachlion wrote:I made a follow up after the failure of the denim skirt. This time I used the last of my heavy black twill and used the pattern block from Diane Deziel from YouTube, and some modifications to make the hem wider. I'm still not satisfied because the skirt is a little too long. I have to see what a 2 or 4 cm reduction will bring.
That one, Sir, to mind is absolutely perfect. Bravo. I'd wear that in a heartbeat. It's got nice lines and a good length, isn't too wide nor too narrow. Just about perfect.

And I'm just a bit envious of that sewing table just so it's known.
Retrocomputing -- It's not just a job, it's an adventure!
Post Reply